Self clinching fasteners / Self clinching press｜Stud welding system and industrial fastener

Self clinching fasteners/
Self clinching press

Self clinching fasteners

Spacer to which installation the following height and length are equal.It is the best because there is specially no necessary one for an easy basic prop.

It is not easy to come off easily by Rorret that is larger than it is possible to do press-fitting and the axis diameter.

It is a stud easily attachable only by press-fitting the press to a lamina. The surface of the board is put up and the screw is put up flatly, and vertically.

The oak is beautiful and strength is also steady by clinching stud of a new type.

It is a spacer to press-fit it to the board of the printed wiring board.

It is clinching nut of the hexagon. It is the best for a lamina and the aluminum board of the processing steel board. The installation is easy because there is a guide to the hole in the under.

It is a nut attachable to the respect where the screw of a lamina is not put up and the aluminum board and the processing steel board, etc. that cannot be welded.

It is a nut made of the Stainless easily attachable to a lamina of aluminum. The inside and outside of the board and finish are beautiful because it installs in board thickness.

It is clinching nut that can cancel the misregistration when assembling it. The screw floats, and a little misregistration can be covered.

It is space-saving, and, a stainless nut of beautiful finish. It is the best for the aluminum board that cannot be welded.

The other side of the nut is clinching nut that the window shade is done. It is the best for the installation of the respect that wants to be shielded.

It is a nut that prevents screw looseness with built-in 66 nylon.

It is a nut to press-fit it to the board such as printed wiring boards.

It is a press only for the oil pressure type press-fitting to 70kN.

To Pagetop

+81-93-562-0170

Inquiry and request for brochure are here!

i-Spacers

Method of obtaining press-fitting

i-Spacers　Method of obtaining press-fitting

Specification and characteristic Method of obtaining press-fitting

Size table of i-SpacersUnit(mm)

Stud dia	Pitch	Material		D (Max)	B ±0.1	h 0 -0.1	L ±0.2 (We will produce lengths other than the following.)											Installation material
Stud dia	Pitch	Steel	Stain -less	D (Max)	B ±0.1	h 0 -0.1	L ±0.2 (We will produce lengths other than the following.)											Minimum board thickness	Installation hole diameter +0.08 0	Installation hole position *
M3	0.5	IF10-M3	IFS10-M3	4.45	6.0	0.95	3	4	5	6	7	8	9	10	11	12	-	1.0	4.5	4.5
M3	0.5	IF15-M3	IFS15-M3	4.45	6.0	1.45	3	4	5	6	7	8	9	10	11	12	-	1.5	4.5	4.5
M4	0.7	IF10-M4	IFS10-M4	5.45	8.0	0.95	3	4	5	6	7	8	-	10	-	12	14	1.0	5.5	5.5
M4	0.7	IF15-M4	IFS15-M4	5.45	8.0	1.45	3	4	5	6	7	8	-	10	-	12	14	1.5	5.5	5.5

* The installation hole position shows a minimum distance to the edge of the installation hole center
and the installation board.

Materials and processing

Model	Material division	Material	Treatment	Surface treatmentt
IF	Steel	Carbon steel	Cementation grilling insertion	Nickel plate
IFS	Stainless	SUS303	Removing fat	Pashibat treatment

i-Spacers　Specification and characteristic Method of obtaining press-fitting

Performance standard and installation condition(Reference value)
1kN≒102kgf、1N・m≒10.2kgf・cm

Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	SPCC				A5052Aluminium board
Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	Instal- lation pressure input(kN)	*Axis direction reten- tivity (kN)	Rotation direction reten- tivity (Nm)	Fall moment(Nm)	Instal- lation pressure input (kN)	*Axis direction reten- tivity (kN)	Rotation direction reten- tivity (Nm)	Fall mo- ment (Nm)
IF10-M3	1.0	9.0	0.7	3.0	1.2	5.0	0.4	1.5	0.8
IF15-M3	1.5	9.0	0.8	3.5	2.0	5.0	0.7	2.0	1.2
IF10-M4	1.0	13.5	0.8	3.5	1.8	7.0	0.5	2.5	1.0
IF15-M4	1.5	14.0	1.0	4.0	3.0	8.0	0.8	3.0	1.5

* The in press-fitting and the opposite direction is called Axis direction retentivity.

To Pagetop

+81-93-562-0170

Inquiry and request for brochure are here!

Self Clinching Spacers

Method of obtaining press-fitting

Self Clinching Spacers

Specification and characteristic Method of obtaining press-fitting

Size table of through type（SST）Unit(mm)

Stud dia	Pitch	Material			D -0.08	B ±0.2	L ±0.2														Installation material
Stud dia	Pitch	Steel	Stain- less	Alumi- nium	D -0.08	B ±0.2	All screw type										Depth of effective screw				Mini- mum board thick- ness	Instal- lation hole dia- meter +0.08 0	Instal- lation hole position *
M2	0.4	SST-M2	SSTS-M2	SSTA-M2	4.18	5.2	3	4	-	6	-	8	-	10	-	12	-	-	-	-	1.0	4.2	6.0
M2.5	0.45	SST-M2.5	SSTS-M2.5	SSTA-M2.5
M3	0.5	SST4.2-M3	SSTS4.2-M3	SSTA4.2-M3
M3	0.5	SST-M3	SSTS-M3	SSTA-M3	6.18	7.2	3	4	5	6	7	8	9	10	11	12	13	14	15	-		6.2	7.0
M4	0.7	SST-M4	SSTS-M4	SSTA-M4	7.18	8.2	3	4	5	6	7	8	9	10	11	12	13	14	15	-		7.2	8.0
M5	0.8	SST-M5	SSTS-M5	SSTA-M5	7.18	8.2	3	4	-	6	-	8	-	10	-	12	-	14	15	16		7.2	8.0

* The installation hole position shows a minimum distance to the edge of the installation hole center
and the installation board.

Size table of blind type(SSB)Unit(mm)

Stud dia	Pitch	Material			D -0.08	B ±0.2	L ±0.2 The size in following () shows minimum size S.								Installation material
Stud dia	Pitch	Steel	Stain- less	Alumi- nium	D -0.08	B ±0.2	L ±0.2 The size in following () shows minimum size S.								Mini- mum board thick- ness	Instal- lation hole dia- meter +0.08 0	Instal- lation hole posi- tion *
M2	0.4	SSB-M2	SSBS-M2	SSBA-M2	4.18	5.2	6 (3.0)	8 (4.0)	10 (4.0)	12 (5.0)	14 (6.5)	16 (6.5)	18 (9.5)	2.0 (9.5)	1.0	4.2	6.0
M2.5	0.45	SSB-M2.5	SSBS-M2.5	SSBA-M2.5
M3	0.5	SSB4.2-M3	SSBS4.2-M3	SSBA4.2-M3
M3	0.5	SSB-M3	SSBS-M3	SSBA-M3	6.18	7.2										6.2	7.0
M4	0.7	SSB-M4	SSBS-M4	SSBA-M4	7.18	8.2										7.2	8.0
M5	0.8	SSB-M5	SSBS-M5	SSBA-M5	7.18	8.2										7.2	8.0

* The installation hole position shows a minimum distance to the edge of the installation hole center
and the installation board.

Materials and processing

Model	Material division	Material	Treatment	Surface treatmentt
SST	Steel	Carbon steel	Cementation grilling insertion	Nickel plate
SSB	Steel	Carbon steel	Cementation grilling insertion	Nickel plate
SSTS	Stainless	SUS303	Removing fat	Pashibat treatment
SSBS	Stainless	SUS303	Removing fat	Pashibat treatment
SSTA	Aluminium	A2011	Removing fat	-
SSBA	Aluminium	A2011	Removing fat	-

Performance standard and installation condition(Reference value)
1kN≒102kgf、1N・m≒10.2kgf・cm

Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	SPCC
Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	Installation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)
M2、M2.5	1.0	10	1.0	2.0
4.2、M3		10	1.0	2.0
M3		15	2.0	3.0
M4			2.2	5.0
M5			2.2	5.0

* The in press-fitting and the opposite direction is called Axis direction retentivity.

To Pagetop

+81-93-562-0170

Inquiry and request for brochure are here!

Self Clinching Studs

Method of obtaining press-fitting

Self Clinching Studs

Specification and characteristic Method of obtaining press-fitting

Size table of Self Clinching StudsUnit(mm)

Stud dia	Pitch	Material		D ±0.4	H (Max)	L ±0.4 (We will produce lengths other than the following. )													Installation material
Stud dia	Pitch	Steel	Stain- less	D ±0.4	H (Max)	L ±0.4 (We will produce lengths other than the following. )													Mini- mum board thick- ness	Instal- lation hole dia- meter +0.08 0	Instal- lation hole position *
M3	0.5	SD-M3	SDS-M3	4.6	2.1	6	8	10	12	15	18	20	-	-	-	-	-	-	1.0	3.0	5.6
M4	0.7	SD-M4	SDS-M4	5.9	2.4	-	8	10	12	15	18	20	22	25	28	30	35	-		4.0	7.2
M5	0.8	SD-M5	SDS-M5	6.5	2.7	-	-	10	12	15	18	20	22	25	28	30	35	38		5.0	7.2
M6	1.0	SD-M6	SDS-M6	8.2	3.0	-	-	-	12	15	18	20	22	25	28	30	35	38	1.4	6.0	7.9
M8	1.25	SD-M8	SDS-M8	9.6	3.7	-	-	-	-	15	18	20	22	25	28	30	35	38	2.0	8.0	9.6

* The installation hole position shows a minimum distance to the edge of the installation hole center
and the installation board.

Self Clinching Studs

Materials and processing

Model	Material division	Material	Treatment	Surface treatmentt
SD	Steel	Carbon steel	Cementation grilling insertion	Trivalent Unichrome
SDS	Stainless	SUS304又はXM-7	Removing fat	Pashibat treatment

Performance standard and installation condition(Reference value)
1kN≒102kgf、1N・m≒10.2kgf・cm

Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	SPCC
Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	Installation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)
M3	1.0	15	1.0	2.0
M4		20	1.2	4.0
M5		25	1.4	6.0
M6	1.4	30	2.0	12.0
M8	2.0	35	3.0	18.0

* The in press-fitting and the opposite direction is called Axis direction retentivity.

To Pagetop

+81-93-562-0170

Inquiry and request for brochure are here!

Self Clinching AG Studs

Method of obtaining press-fitting

Self Clinching AG Studs

Specification and characteristic Method of obtaining press-fitting

Size table of Self Clinching AG StudsUnit(mm)

Stud dia	Pitch	Material		D ±0.2	H (Max)	L ±0.4 (We will produce lengths other than the following. )									Installation material
Stud dia	Pitch	Steel	Stainless	D ±0.2	H (Max)	L ±0.4 (We will produce lengths other than the following. )									Minimum board thick- ness	Instal- lation hole diameter +0.08 0	Instal- lation hole position *
M3	0.5	AGS-M3	AGSS-M3	4.0	0.5	6	8	10	12	15	18	20	-	-	1.0	3.0	5.6
M4	0.7	AGS-M4	AGSS-M4	5.0	0.5	-	8	10	12	15	18	20	22	25	1.0	4.0	7.2
M5	0.8	AGS-M5	AGSS-M5	6.0	0.5	-	-	10	12	15	18	20	22	25	1.0	5.0	7.2

* The installation hole position shows a minimum distance to the edge of the installation hole center
and the installation board.

Materials and processing

Model	Material division	Material	Treatment	Surface treatment
AGS	Steel	Carbon steel	Cementation grilling insertion	Trivalent Unichrome
AGSS	Stainless	SUS304 or XM-7	Removing fat	Pashibat treatment

Performance standard and installation condition(Reference value)1kN≒102kgf、1N・m≒10.2kgf・cm

Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	SPCC
Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	Installation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)
M3	1.0	9.0	0.95	2.8
M4	1.0	12.0	1.35	3.5
M5	1.0	15.0	1.70	6.5

* The in press-fitting and the opposite direction is called Axis direction retentivity.

To Pagetop

+81-93-562-0170

Inquiry and request for brochure are here!

Self Clinching Braoching Spacers(for resin)

Method of obtaining press-fitting

Self Clinching Braoching Spacers(for resin)

Specification and characteristic Method of obtaining press-fitting

Size table of Self Clinching Braoching Spacers(for resin)Unit(mm)

Stud dia	Pitch	Material			D ±0.08	B ±0.13	L ±0.13						Installation material
Stud dia	Pitch	Steel	Stainless	Brass	D ±0.08	B ±0.13	All screw type					Depth of effect- ive screw	Mini- mum board thick- ness	Instal- lation hole diameter +0.08 0	Instal- lation hole position *
M3	0.5	BIF-M3	BIFS-M3	BIFB-M3	4.55	5.56	3	4	6	8	10	12	1.5	4.2	4.4
M4	0.7	BIF-M4	BIFS-M4	BIFB-M4	6.68	8.74								6.4	6.4
M5	0.8	BIF-M5	BIFS-M5	BIFB-M5	7.24	9.53								6.9	7.1

* The installation hole position shows a minimum distance to the edge of the installation hole center
and the installation board.

Materials and processing

Model	Material division	Material	Treatment	Surface treatmentt
BIF	Steel	Carbon steel	-	Trivalent Unichrome
BIFS	Stainless	SUS303	Removing fat	Pashibat treatment
BIFB	Brass	C3604	Removing fat	-

Self Clinching Braoching Spacers(for resin)

Performance standard and installation condition(Reference value)1kN≒102kgf、1N・m≒10.2kgf・cm

Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	SPCC
Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	Installation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)
M3	1.5	2.0	0.4	1.4
M4		2.0	0.4	3.0
M5		3.0	0.6	4.0

* The in press-fitting and the opposite direction is called Axis direction retentivity.

To Pagetop

+81-93-562-0170

Inquiry and request for brochure are here!

Self clinching Hex Nuts

Method of obtaining press-fitting

Self clinching Hex Nuts

There is no fall of the nut at the time of press-fitting for pilot part (D) to fit the hole.

Specification and characteristic Method of obtaining press-fitting

Size table of Self clinching Hex NutsUnit(mm)

Stud dia	Pitch	Material		D (Max)	B -0.2	C (約)	H ±0.1	h (Max)	Installation material
Stud dia	Pitch	Steel	Stainless	D (Max)	B -0.2	C (約)	H ±0.1	h (Max)	Minimum board thickness	Installation hole diameter +0.08 0	Installation hole position *
M2	0.4	HSN-M2-1	HSNS-M2-1	4.45	5.5	6.4	2.0	1.0	1.0	4.5	4.5
M2.5	0.45	HSN-M2.5-1	HSNS-M2.5-1
M2.6	0.45	HSN-M2.6-1	HSNS-M2.6-1
M3	0.5	HSN-M3-1	HSNS-M3-1
M3	0.5	HSN-M3-2	HSNS-M3-2					1.4	1.4
M4	0.7	HSN-M4-1	HSNS-M4-1	5.45	7.0	8.1	2.2	1.0	1.0	5.5	5.5
M4	0.7	HSN-M4-2	HSNS-M4-2	5.45	7.0	8.1	2.2	1.4	1.4	5.5	5.5
M5	0.8	HSN-M5-1	HSNS-M5-1	6.45	8.0	9.2	3.0	1.0	1.0	6.5	6.5
M5	0.8	HSN-M5-2	HSNS-M5-2	6.45	8.0	9.2	3.0	1.4	1.4	6.5	6.5
M6	1.0	HSN-M6-1	HSNS-M6-1	7.95	10.0	11.5	4.0	1.0	1.0	8.0	8.0
M6	1.0	HSN-M6-2	HSNS-M6-2	7.95	10.0	11.5	4.0	1.4	1.4	8.0	8.0
M8	1.25	HSN-M8-1	HSNS-M8-1	9.95	13.0	15.0	4.5	1.4	1.4	10.0	10.0
M8	1.25	HSN-M8-2	HSNS-M8-2	9.95	13.0	15.0	4.5	2.0	2.0	10.0	10.0

* The installation hole position shows a minimum distance to the edge of the installation hole center
and the installation board.

Materials and processing

Model	Material division	Material	Treatment	Surface treatmentt
HSN	Steel	Carbon steel	Cementation grilling insertion	Trivalent Unichrome
HSNS	Stainless	SUS303	Removing fat	Pashibat treatment

Performance standard and installation condition(Reference value)1kN≒102kgf、1N・m≒10.2kgf・cm

Performance standard and installation condition ＼ Stud dia	Division of the shank	Board thick- ness of instal- lation material	SPCC			A5052Aluminium board
Performance standard and installation condition ＼ Stud dia	Division of the shank	Board thick- ness of instal- lation material	Instal- lation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)	Instal- lation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)
M2、M2.5、M2.6	-1	1.0	12	0.6	2.0	6.0	0.4	1.2
M3	-1	1.0	12	0.6	2.0	6.0	0.4	1.2
M3	-2	1.4	13	0.9	2.5	7.0	0.7	1.5
M4	-1	1.0	13	0.7	3.0	8.0	0.5	2.0
M4	-2	1.4	14	1.0	4.0	10	0.8	3.0
M5	-1	1.0	14	0.8	4.0	9.0	0.55	3.0
M5	-2	1.4	15	1.1	5.0	11	0.85	4.0
M6	-1	1.0	17	1.0	8.0	12	0.7	6.0
M6	-2	1.4	20	1.4	12.0	14	1.0	8.0
M8	-2	1.4	25	1.5	16.0	16	1.2	10.0
M8	-3	2.0	30	1.9	20.0	18	1.5	12.0

* The in press-fitting and the opposite direction is called Axis direction retentivity.

To Pagetop

+81-93-562-0170

Inquiry and request for brochure are here!

Self Clinching Nuts

Method of obtaining press-fitting

Self Clinching Nuts

The mother material pushed by Rorret can flow to pilot's applying joint, and high conclusion power be gained.

Specification and characteristic Method of obtaining press-fitting

Size table of Self Clinching NutsUnit(mm)

Stud dia	Pitch	Material		D (Max)	B ±0.2	H ±0.1	h (Max)	Installation material
Stud dia	Pitch	Steel	Stainless	D (Max)	B ±0.2	H ±0.1	h (Max)	Minimum board thickness	Installation hole diameter +0.08 0	Installation hole position *
M2	0.4	SN-M2-0	SNS-M2-0	4.22	6.3	1.5	0.76	0.8	4.25	4.8
		SN-M2-1	SNS-M2-1				0.97	1.0
		SN-M2-2	SNS-M2-2				1.37	1.4
M2.5	0.45	SN-M2.5-0	SNS-M2.5-0				0.76	0.8
		SN-M2.5-1	SNS-M2.5-1				0.97	1.0
		SN-M2.5-2	SNS-M2.5-2				1.37	1.4
M3	0.5	SN-M3-0	SNS-M3-0				0.76	0.8
		SN-M3-1	SNS-M3-1				0.97	1.0
		SN-M3-2	SNS-M3-2				1.37	1.4
M4	0.7	SN-M4-0	SNS-M4-0	5.38	7.9	2.0	0.76	0.8	5.4	6.9
		SN-M4-1	SNS-M4-1				0.97	1.0
		SN-M4-2	SNS-M4-2				1.37	1.4
M5	0.8	SN-M5-0	SNS-M5-0	6.38	8.7		0.76	0.8	6.4	7.1
		SN-M5-1	SNS-M5-1				0.97	1.0
		SN-M5-2	SNS-M5-2				1.37	1.4
M6	1.0	SN-M6-1	SNS-M6-1	8.72	11.05	4.1	0.97	1.0	8.75	8.6
		SN-M6-2	SNS-M6-2				1.37	1.4
		SN-M6-3	SNS-M6-3				2.21	2.3
M8	1.25	SN-M8-2	SNS-M8-2	10.44	12.65	5.5	1.37	1.4	10.5	9.7
M8	1.25	SN-M8-3	SNS-M8-3	10.44	12.65	5.5	2.21	2.3	10.5	9.7
M10	1.5	SN-M10-3	SNS-M10-3	12.65	15.0	7.0	1.95	2.0	12.7	11.6
M12	1.75	SN-M12-3	SNS-M12-3	14.65	17.0	8.0	1.95	2.0	14.7	13.5
M12	1.75	SN-M12-4	SNS-M12-4	14.65	20.0	8.0	2.80	3.0	14.7	18.0

* The installation hole position shows a minimum distance to the edge of the installation hole center
and the installation board.

Materials and processing

Model	Material division	Material	Treatment	Surface treatmentt
SN	Steel	Carbon steel	Cementation grilling insertion	Trivalent Unichrome
SNS	Stainless	SUS303	Removing fat	Pashibat treatment

Performance standard and installation condition(Reference value)1kN≒102kgf、1N・m≒10.2kgf・cm

Performance standard and installation condition ＼ Stud dia	Division of the shank	Board thick- ness of instal- lation material	SPCC			A5052Aluminium board
Performance standard and installation condition ＼ Stud dia	Division of the shank	Board thick- ness of instal- lation material	Installation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)	Installation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)
M2	-0	0.8	7.0～16.0	0.5	1.5	6.0～8.0	0.3	1.0
M2.5	-1	1.0		0.6			0.4	1.2
M3	-2	1.4		1.0			0.8	1.5
M4	-0	0.8	10.0～18.0	0.5	3.0	7.0～12.0	0.35	2.5
	-1	1.0		0.7	4.0		0.5	2.8
	-2	1.4		1.1	4.5		0.85	4.0
M5	-0	0.8	12.0～25.0	0.6	3.5	8.0～13.0	0.4	3.0
	-1	1.0		0.85	4.0		0.5	3.5
	-2	1.4		1.15	6.0		0.9	5.0
M6	-1	1.0	16.0～30.0	1.0	7.0	9.0～15.0	0.4	6.0
	-2	1.4		1.6	16.0		0.8	11.0
	-3	2.3		2.5	28.0		1.6	14.0
M8	-2	1.4	20.0～36.0	2.5	25.0	15.0～20.0	0.9	12.0
M8	-3	2.3	20.0～36.0	3.0	30.0	15.0～20.0	1.8	20.0
M10	-3	2.0	35.0	3.0	35.0	20.0	2.0	30.0
M12	-3	2.0	38.0	3.5	40.0	23.0	2.2	32.0
M12	-4	-	40.0	4.0	45.0	25.0	2.5	34.0

* The in press-fitting and the opposite direction is called Axis direction retentivity.

To Pagetop

+81-93-562-0170

Inquiry and request for brochure are here!

Self Clinching Flush Nuts

Method of obtaining press-fitting

Self Clinching Flush Nuts

Specification and characteristic Method of obtaining press-fitting

Size table of Self Clinching Flush NutsUnit(mm)

Stud dia	Pitch	Material	D (Max)	B 0 -0.2	H (Max)	Installation material
Stud dia	Pitch	Stainless	D (Max)	B 0 -0.2	H (Max)	Minimum board thickness	Installation hole diameter +0.08 0	Installation hole position *
M2	0.4	AFN-M2-1	4.35	4.8	1.47	1.5	4.4	6.0
M2	0.4	AFN-M2-2			1.97	2.0	4.4	6.0
M3	0.5	AFN-M3-1			1.47	1.5	4.4	6.0
M3	0.5	AFN-M3-2			1.97	2.0	4.4	6.0
M4	0.7	AFN-M4-1	7.35	7.9	1.47	1.5	7.4	7.2
M4	0.7	AFN-M4-2	7.35	7.9	1.97	2.0	7.4	7.2
M5	0.8	AFN-M5-1	7.85	8.7	1.47	1.5	7.9	8.0
M5	0.8	AFN-M5-2	7.85	8.7	1.97	2.0	7.9	8.0

* The installation hole position shows a minimum distance to the edge of the installation hole center
and the installation board.

Materials and processing

Model	Material division	Material	Treatment	Surface treatmentt
AFN	Stainless	SUS303	Removing fat	Pashibat treatment

Performance standard and installation condition(Reference value)1kN≒102kgf、1N・m≒10.2kgf・cm

Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	SPCC			A5052Aluminium board
Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	Installation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)	Installation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)
AFN-M2-1	1.5	11.0	0.9	1.3	8.0	0.8	1.2
AFN-M3-1	1.5	11.0	0.9	1.3	8.0	0.8	1.2
AFN-M4-1	1.5	15.0	1.1	3.5	10.0	1.0	3.0
AFN-M5-1	1.5	18.0	1.2	5.0	11.0	1.1	4.0

* The in press-fitting and the opposite direction is called Axis direction retentivity.

To Pagetop

+81-93-562-0170

Inquiry and request for brochure are here!

Self Clinching Floating Nuts

Method of obtaining press-fitting

Self Clinching Floating Nuts

Specification and characteristic Method of obtaining press-fitting

Size table of Self Clinching Floating NutsUnit(mm)

Stud dia	Pitch	Material		D (Max)	B ±0.2	A (Max)	H (Max)	h (Max)	Installation material
Stud dia	Pitch	Steel	Stainless	D (Max)	B ±0.2	A (Max)	H (Max)	h (Max)	Minimum board thickness	Installation hole diameter +0.08 0	Installation hole position *
M3	0.5	AFL-M3-1	AFLS-M3-1	7.35	9.1	7.4	3.3	0.97	1.0	7.4	7.6
M3	0.5	AFL-M3-2	AFLS-M3-2	7.35	9.1	7.4		1.37	1.4	7.4	7.6
M4	0.7	AFL-M4-1	AFLS-M4-1	9.35	11.2	9.3		0.97	1.0	9.4	8.6
M4	0.7	AFL-M4-2	AFLS-M4-2	9.35	11.2	9.3		1.37	1.4	9.4	8.6
M5	0.8	AFL-M5-1	AFLS-M5-1	10.25	11.9	10.3	4.4	0.97	1.0	10.3	9.0
M5	0.8	AFL-M5-2	AFLS-M5-2	10.25	11.9	10.3	4.4	1.37	1.4	10.3	9.0

* The installation hole position shows a minimum distance to the edge of the installation hole center
and the installation board.

Materials and processing

Model	Material division	Material	Treatment	Surface treatmentt
AFL	Steel	Carbon steel	Cementation grilling insertion	ユニクロメッキ
AFLS	Stainless	SUS303	Removing fat	Pashibat treatment

Performance standard and installation condition(Reference value)1kN≒102kgf、1N・m≒10.2kgf・cm

Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	SPCC			A5052Aluminium board
Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	Installation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)	Installation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)
AFL-M3-1	1.0	15.0	1.4	1.5	8.0	1.0	1.5
AFL-M3-2	1.6	18.0	1.5	1.5	9.0	1.1	1.5
AFL-M4-1	1.0	15.0	1.9	4.0	8.0	1.4	4.0
AFL-M4-2	1.6	18.0	2.0	4.0	10.0	1.5	4.0

* The in press-fitting and the opposite direction is called Axis direction retentivity.

To Pagetop

+81-93-562-0170

Inquiry and request for brochure are here!

Self Clinching Miniature Nuts

Method of obtaining press-fitting

Self Clinching Miniature Nuts

Specification and characteristic Method of obtaining press-fitting

Size table of Self Clinching Miniature NutsUnit(mm)

Stud dia	Pitch	Material	D (Max)	A (Max)	B ±0.2	H ±0.2	h (Max)	Installation material
Stud dia	Pitch	Stainless	D (Max)	A (Max)	B ±0.2	H ±0.2	h (Max)	Minimum board thickness	Installation hole diameter +0.08 0	Installation hole position *
M2	0.4	AMN-M2-1	3.58	2.5	4.04	1.65	0.98	1.0	3.6	2.8
M2	0.4	AMN-M2-2	3.58	2.5	4.04	1.65	1.48	1.5	3.6	2.8
M2.5	0.45	AMN-M2.5-1	3.96	3.2	4.48	1.85	0.98	1.0	4.0	3.2
M2.5	0.45	AMN-M2.5-2	3.96	3.2	4.48	1.85	1.48	1.5	4.0	3.2
M3	0.5	AMN-M3-1	4.34	3.85	4.92	2.1	0.98	1.0	4.4	3.6
M3	0.5	AMN-M3-2	4.34	3.85	4.92	2.1	1.48	1.5	4.4	3.6
M4	0.7	AMN-M4-1	7.34	5.03	8.17	2.75	0.98	1.0	7.4	5.2
M4	0.7	AMN-M4-2	7.34	5.03	8.17	2.75	1.48	1.5	7.4	5.2

* The installation hole position shows a minimum distance to the edge of the installation hole center
and the installation board.

Materials and processing

Model	Material division	Material	Treatment	Surface treatmentt
AMN	Stainless	SUS303	Removing fat	Pashibat treatment

Performance standard and installation condition(Reference value)1kN≒102kgf、1N・m≒10.2kgf・cm

Performance standard and installation condition ＼ Stud dia		Board thick- ness of instal- lation material	SPCC			A5052Aluminium board
Performance standard and installation condition ＼ Stud dia		Board thick- ness of instal- lation material	Installation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)	Installation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)
M3	AMN-M3-1	1.0	9.0	0.85	1.5	4.0	0.4	1.5
M3	AMN-M3-2	1.5	9.0	1.2	1.5	4.0	0.7	1.5
M4	AMN-M4-1	1.0	15.0	1.35	4.0	7.0	0.7	3.5
M4	AMN-M4-2	1.5	15.0	1.9	4.5	7.0	1.1	4.0

* The in press-fitting and the opposite direction is called Axis direction retentivity.

To Pagetop

+81-93-562-0170

Inquiry and request for brochure are here!

Self Clinching Blind Nuts

Method of obtaining press-fitting

Self Clinching Blind Nuts

Specification and characteristic Method of obtaining press-fitting

Size table of Self Clinching Blind NutsUnit(mm)

Stud dia	Pitch	Material		D (Max)	A (Max)	B (Max)	S (Mini- mum)	L (Max)	H +0.25	h (Max)	Installation material
Stud dia	Pitch	Steel	Stain- less	D (Max)	A (Max)	B (Max)	S (Mini- mum)	L (Max)	H +0.25	h (Max)	Mini- mum board thick- ness	Instal- lation hole diameter +0.08 0	Instal- lation hole position *
M3	0.5	ABN-M3-1	ABNS-M3-1	4.22	3.8	6.35	5.3	8.5	9.6	0.98	1.0	4.25	4.8
M3	0.5	ABN-M3-2	ABNS-M3-2	4.22	3.8	6.35	5.3	8.5	9.6	1.38	1.4	4.25	4.8
M4	0.7	ABN-M4-1	ABNS-M4-1	5.38	5.2	7.95	6.8	9.8	11.2	0.98	1.0	5.40	6.9
M4	0.7	ABN-M4-2	ABNS-M4-2	5.38	5.2	7.95	6.8	9.8	11.2	1.38	1.4	5.40	6.9
M5	0.8	ABN-M5-1	ABNS-M5-1	6.38	6.0	8.75	7.0	9.8	11.2	0.98	1.0	6.40	7.1
M5	0.8	ABN-M5-2	ABNS-M5-2	6.38	6.0	8.75	7.0	9.8	11.2	1.38	1.4	6.40	7.1
M6	1.0	ABN-M6-1	ABNS-M6-1	8.72	7.8	11.10	7.8	12.7	14.3	0.98	1.0	8.75	8.6
M6	1.0	ABN-M6-2	ABNS-M6-2	8.72	7.8	11.10	7.8	12.7	14.3	1.38	1.4	8.75	8.6

* The installation hole position shows a minimum distance to the edge of the installation hole center
and the installation board.

Materials and processing

Model	Material division	Material	Treatment	Surface treatmentt
ABN	Steel	Carbon steel	Cementation grilling insertion	Trivalent Unichrome
ABNS	Stainless	SUS303	Removing fat	Pashibat treatment

Performance standard and installation condition(Reference value)1kN≒102kgf、1N・m≒10.2kgf・cm

Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	SPCC			A5052Aluminium board
Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	Installation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)	Installation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)
M3	1.0	13.0	0.6	1.8	6.0	0.45	1.5
M4	1.0	18.0	0.65	3.8	8.0	0.50	3.0
M5	1.0	20.0	0.68	4.5	10.0	0.50	4.0
M6	1.6	28.0	1.85	12.5	18.0	1.45	12.0

* The in press-fitting and the opposite direction is called Axis direction retentivity.

To Pagetop

+81-93-562-0170

Inquiry and request for brochure are here!

Self linching Nylon Lock Nuts

Method of obtaining press-fitting

Self linching Nylon Lock Nuts

Specification and characteristic Method of obtaining press-fitting

Size table of Self linching Nylon Lock NutsUnit(mm)

Stud dia	Pitch	Material		D (Max)	A (Max)	B (Max)	H (Max)	Installation material
Stud dia	Pitch	Steel	Stainless	D (Max)	A (Max)	B (Max)	H (Max)	Minimum board thickness	Installation hole diameter +0.08 0	Installation hole position *
M3	0.5	ANY-M3	ANYS-M3	5.97	5.5	7.1	3.6	1.0	6.0	4.3
M4	0.7	ANY-M4	ANYS-M4	7.47	7.1	8.6	4.2	1.0	7.5	5.6
M5	0.8	ANY-M5	ANYS-M5	7.97	7.4	8.9	4.5	1.0	8.0	6.4

* The installation hole position shows a minimum distance to the edge of the installation hole center
and the installation board.

Materials and processing

Model	Material division	Material	Treatment	Surface treatmentt
ANY	Steel	Carbon steel	Cementation grilling insertion	ユニクロメッキ
ANYS	Stainless	SUS303	Removing fat	Pashibat treatment

Performance standard and installation condition(Reference value)1kN≒102kgf、1N・m≒10.2kgf・cm

Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	SPCC			A5052Aluminium board
Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	Installation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)	Installation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)
M3	1.0	7.0	0.72	2.2	13.0	1.0	2.3
M4	1.0	7.0	0.8	3.2	13.0	1.2	6.9
M5	1.0	7.0	0.8	4.6	13.0	1.4	8.0

* The in press-fitting and the opposite direction is called Axis direction retentivity.

To Pagetop

+81-93-562-0170

Inquiry and request for brochure are here!

Self Clinching Broaching Nuts(For resin)

Method of obtaining press-fitting

Self Clinching Broaching Nuts(For resin)

Specification and characteristic Method of obtaining press-fitting

Size table of Self Clinching Broaching Nuts(For resin)Unit(mm)

Stud dia	Pitch	Material			D ±0.08	B ±0.13	H ±0.13	Installation material
Stud dia	Pitch	Steel	Stainless	Brass	D ±0.08	B ±0.13	H ±0.13	Minimum board thickness	Installation hole diameter +0.08 0	Installation hole position *
M2.5	0.5	BSN-M2.5	BSNS-M2.5	BSNB-M2.5	4.55	5.56	1.5	1.5	4.2	4.4
M3	0.56	BSN-M3	BSNS-M3	BSNB-M3	4.55	5.56	1.5		4.2	4.4
M4	0.7	BSN-M4	BSNS-M4	BSNB-M4	6.68	8.74	2.0		6.4	6.4
M5	0.8	BSN-M5	BSNS-M5	BSNB-M5	7.24	9.53	3.0		6.9	7.1

* The installation hole position shows a minimum distance to the edge of the installation hole center
and the installation board.

Materials and processing

Model	Material division	Material	Treatment	Surface treatmentt
BSN	Steel	Carbon steel	-	ユニクロメッキ
BSNS	Stainless	SUS303	Removing fat	Pashibat treatment
BSNB	Brass	C3604	Removing fat	-

Self Clinching Broaching Nuts(For resin)

Performance standard and installation condition(Reference value)1kN≒102kgf、1N・m≒10.2kgf・cm

Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	プリント基板
Performance standard and installation condition ＼ Stud dia	Board thick- ness of instal- lation material	Installation pressure input (kN)	*Axis direction retentivity (kN)	Rotation direction retentivity (Nm)
M2.5	1.5	2.0	0.45	1.5
M3		2.0
M4		2.5
M5		2.8	0.6	4.5

* The in press-fitting and the opposite direction is called Axis direction retentivity.

To Pagetop

+81-93-562-0170

Inquiry and request for brochureはこちら

Self Clinching Press

Because it is an oil pressure type, press-fitting strength of the fastener is steady.
The bottom dead center corresponding to board thickness can be maintained by an original pressure control method.
Safety mechanism that defends operator.
Frame design and accessories that can easily do fastener press-fitting
It corresponds to the automatic supply system. (option)

ACP-610: Pressurizing power：70(kN); Stroke length：203mm; Frame gap：610mm; Power supply：200V; Tank capacity：45(L); Main body weight：1,100(kg); Main body size：880×1,170×1787(mm)

Self Clinching Press

To Pagetop

Services

・Stud welding system manufacturing sales
・Industrial fastener manufacturing sales
・Stud welding　responsibility
construction for various boilers
・Product related to magnesium alloy

CD stud welding machine
CD stud welding gun /Welding method
Collet / Stop bar
CD stud bolt
CD female stud
Self clinching fastener
Handy tester
Stud welding robot
Self clinching press

Overview

ASIA GIKEN CO., LTD.

72-39　Nishiminatomachi
Kokurakita-ku　Kitakyusyu-city Fukuoka 803-0801
TEL：＋81-93-562-0170
FAX：＋81-93-562-0250

info@asiagiken.co.jp

QRCode

We offer that the stud welding system to the inspection machine to development, manufacture and sales by in-house consistent system.

The fastener connects the world. ASIA GIKEN CO., LTD